MAINTENANCE
105
2. Lock cowl in place by pulling lower cowl latch down.
ob01671
3. Place top cowl into position over engine, front first. Ensure
cowl fits properly into the rubber seal.
4. The top cowl will lock into place when downward pressure is
applied to the back side of cowl. Ensure cowl is securely
fastened by pulling up on back of cowl.
Cleaning Care for Top and Bottom Cowls
IMPORTANT: Dry wiping (wiping the plastic surface when it is dry)
will result in minor surface scratches. Always wet the surface
before cleaning. Do not use detergents containing hydrochloric
acid. Follow the cleaning and waxing procedure.
CLEANING AND WAXING PROCEDURE
1. Before washing, rinse the cowls with clean water to remove
dirt and dust that may scratch the surface.
2. Wash the cowls with clean water and a mild non-abrasive
soap. Use a soft clean cloth when washing.
3. Dry thoroughly with a soft clean cloth.
4. Wax the surface using a non-abrasive automotive polish
(polish designed for clear coat finishes). Remove the applied
wax by hand using a clean soft cloth.
To Next Page
Loading...
