Mercury 200 VERADO User Manual

TRANSPORTING
33
3. For maximum ground clearance, the outboard can be tilted to
the full tilt position and supported using the outboards tilt
support bracket and/or an accessory transom support device.
ob01267
Additional clearance may be required for railroad crossings,
driveways and trailer bouncing. Refer to your local dealer for
recommendations.
IMPORTANT: Do not rely on the power trim/tilt system to maintain
proper ground clearance for trailering. The power trim/tilt system
is not intended to support the outboard for trailering.
Shift the outboard to forward gear. This prevents the propeller from
spinning freely when boat is trailered.

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat