Mercury 200 VERADO User Manual

FEATURES AND CONTROLS
41
3. Trim switch (if equipped) - Pressing the trim switch allows the
engine to trim up or down.
5152
4. Throttle only button - Allows the boat operator to increase
engine RPM for warm-up, without shifting the engine into gear.
To engage throttle only, move the control handle into the
neutral position. Press the throttle only button while moving
the control handle ahead to the forward detent. The horn
indicates throttle only is engaged. Advance throttle to increase
engine RPM. To disengage, return control handle to neutral
position. Engine RPM is limited to prevent engine damage.
3416

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat