Mercury 200 VERADO User Manual

FEATURES AND CONTROLS
80
8. Sync button - Pressing the "SYNC" button turns off or on the
auto synchronization feature. Refer to Synchronizing
Engines
N
E
U
T
R
A
L
22945
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY
DOCK
TRANSFER
+
-
a
b
c
e
g
f
d
a - Neutral LEDS
b - Troll button
c - Transfer button
d - Dock button
e - Throttle only
f - 1 lever button
g - Sync button
9. Control handle tension adjustment screw - This screw can be
adjusted to increase or decrease the tension on the control
handle (cover must be removed). This will help prevent
unwanted motion of the handle in rough water. Turn the screw
clockwise to increase tension and counterclockwise to
decrease tension. Adjust to tension desired.

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat