PROPULSION MENU
eng 101
20.Press the "MODE" button to exit the "Launch" mode.
21.Press the "–" button to highlight "Overshoot."
22.Press the "MODE" button to edit "Overshoot."
NOTE: "Overshoot" is the amount of RPM the engine will
achieve above the "RPM Set Point."
23.Press the "–" or "+" button to change the overshoot
percentage setting.
24.Press the "MODE" button to exit the "Overshoot" mode.
25.Press the "–" button to highlight "Duration."
26.Press the "MODE" button to edit "Duration."
NOTE: Duration is the amount of time the engine RPM
"Overshoot" will be allowed.
IMPORTANT: The RPM and speed setpoints will change to the
last setpoint used for that particular new user when using Smart
Tow.
27.Press the "–" or "+" button to change the duration seconds.
28.Press the "MODE" button to exit the "Duration" mode.
29.Press the "–" button to highlight the "Exit" option.
30.Press the "MODE" button to exit the custom launch mode.
To Next Page
Loading...
Need help?
General
