PROPULSION MENU
100 eng
7. Press the "–" or "+" button to edit and change the alpha
character. Press the "MODE" button to move to the next
character. Press the "–" or "+" button to edit and change the
next alpha character. Continue this process until the custom
launch name is complete.
NOTE: All of the alpha characters must be edited before the
"RPM Set Point" can be edited.
MODE
36199
SmartTow
[DOWN]
[SAVE]
[ UP ]
1000
Name
RPM Set Point
J DOE
Speed Set Point
Launch
Overshoot
10.0
1.0
0 %
8. Press the "MODE" button to exit the "Name" edit mode.
9. Press the "–" button to highlight the "RPM Set Point."
10.Press the "MODE" button to edit the "RPM Set Point."
11.Press the "–" or "+" button to change the "RPM Set Point."
12.Press the "MODE" button to exit the "RPM Set Point" mode.
13.Press the "–" button to highlight the "Speed Set Point."
14.Press the "MODE" button to edit the "Speed Set Point."
15.Press the "–" or "+" button to change the "Speed Set Point."
16.Press the "MODE" button to exit the "Speed Set Point"
mode.
17.Press the "–" button to highlight "Launch."
18.Press the "MODE" button to edit "Launch."
19.Press the "–" or "+" button to change the "Launch" setting.
NOTE: There are five launch levels. Level 1 is the most gradual
and level 5 is the most aggressive.
To Next Page
Loading...
Need help?
General
