SETTINGS
eng 21
Menu Options
Brightness
Changes the luminance on all network connected
SmartCraft gauges. The default setting is 50.
Local Brightness
Changes the luminance on the local gauge only. The
default setting is 80.
Display Color Changes the backlighting of the display.
Button Color Changes the lighting of the buttons.
Color Sync Selects the same color option for the display and button.
Remote Light
Allows another network connected monitor gauge to
change the light.
Remote Contrast
Allows another network connected monitor gauge to
change the contrast.
Night Time Mode
Changes the backlight dark and the letters and numbers
to the selected color.
CONTRAST
1. Press the "MODE" button to edit the "Contrast" option.
2. Press the "–" or "+" button to edit the contrast level of the
monitor screen.
3. Press the "MODE" button to save the contrast setting.
4. To exit the "Light/Contrast" menu, press the "–" or "+" button
to highlight the "Exit" option. Press the "MODE" button to
exit the "Light/Contrast" menu.
BRIGHTNESS
1. Press the "–" button to highlight the "Brightness" option.
2. Press the "MODE" button to edit the brightness of the
monitor screen.
3. Press the "–" or "+" button to change the brightness of the
monitor screen.
4. Press the "MODE" button to save the brightness setting.
5. To exit the "Light/Contrast" menu, press the "–" or "+" button
to highlight the "Exit" option. Press the "MODE" button to
exit the "Light/Contrast" menu.
To Next Page
Loading...
Need help?
General
