- 33 -
3. Click Ad d and enter a brief description for the rule.
4. Click Configure in the Hosts Under Control column to add a host, then click Apply.
Host Description - In this field, create a unique description for the host.
Mode - Here are two options, IP Address and M AC Ad d re ss. You can select either of
them from the drop-down list.
If the IP Address is selected, you can see the following item:
IP Address Range - Enter the IP address or address range of the host in dotted-decimal
format (e.g. 192.168.0.23).
If the MAC Address is selected, you can see the following item:
M AC Addr ess - Enter the MAC address of the host in XX-XX- XX-XX-XX-XX format (e.g.
00-11-22-33-44-AA).
To Next Page
Loading...
