8
Chapter 2
Note:
If the login window does not appear, please refer to the FAQ section.
4. Click Change Mode in the top right corner and select Range Extender Mode. Wait for
the router to reboot.
5. Follow the Quick Setup to set up the internet connection.
6. Relocate: Place the router between your host router and the Wi-Fi dead zone. The location
you choose must be within the range of your existing host network.
Extended NetworkHost Network
DevicesHost Router Router
LAN WAN POWER RESET/WPS
7. Enjoy! Connect to the wireless network by using the SSID and password of the extended
network.
2. 2. 4. WISP Mode
In this mode, the router connects to the ISP network wirelessly in areas without wired service.
To Next Page
Loading...
