User Manual : General Settings
User Manual
100
Machines
The following machines are installed:
Displays a list of all installed machines. Machines in this list will be available as possible machine
choices in the Transport Control.
Add
Clicking on the Add button opens the Machine Properties dialog box (see below)
Remove
If a machine is selected (highlighted) in the list, clicking Remove uninstalls the machine and removes it
from the list.
Properties
Clicking on the Properties button opens the Machine Properties dialog box (see below)
OK
Click OK to accept changes (if any) and close the Machines page.
Cancel
Click Cancel to reject changes (if any) and close the Machines page.
Apply
Click Apply to apply changes without closing the Machines page.
General Settings dialog box - Machines Tab page
To Next Page
Loading...