User Manual : Application Specific Configurations
User Manual
280
Discontinuous TimeCode
Auto-Punch mode allows a whole tape with discontinuous TimeCode to automatically be recorded.
• Set all desired tracks is auto-punch mode
• Place Mark In at 00:00:00:00 and Mark Out at 23:59:59:24 (default values for a new project)
• Plug LTC Out from the tape machine into Pyramix
• Set Chase mode to HARD CHASE
• Rewind the tape
• Press Play on the tape machine
Each time a valid TC is encountered Pyramix will lock and start recording a new clip, then stop when the
timecode jumps. A separate media file will be created for each continuous timecode on the tape.
To Next Page
Loading...