30 BA 2076/02/01
<Data logger settings > tab<Data logger settings > tab
<Data logger settings > tab<Data logger settings > tab
<Data logger settings > tab
••
••
•
Data logging:Data logging:
Data logging:Data logging:
Data logging: The top fields can be used to read the number of
stored data records and the date of the first and the last entry. The
<Log Interval> field can be used to set the interval at which the
data are to be saved. An interval of 10 minutes means that data
covering a period of approx. 7.5 months can be saved. The data
memory can retain the information over many years even when the
power is switched off. For more information on the data logging
function, see page 15 in chapter 5.10.
After the <Read out data records> button is pressed a screen (see
right) opens in which you can select the data records which you
want to read (<Load> button). The data records are saved in an
Excel file.
••
••
•
Date and time: Date and time:
Date and time: Date and time:
Date and time: This field can be used to save the current date and
time. A gold cap capacitor retains the date and time memory for
approximately 2 weeks after the power has been turned off. After
this time, the information is lost and must be set again when the
device is commissioned again.
8 Visualization Software
NOTENOTE
NOTENOTE
NOTE
This device does not automatically switch between summer and winter time. Please take into consideration, that due to
this, time differences of stored data can occur.
To Next Page
Loading...
Need help?
General