Commissioning
PRM 10 E | Version 1.05 | EN 17
7 Commissioning
NOTE!
After setting up, remove the protective agent from the rol-
lers, which has been applied in the factory to protect against
rusting.
- Use a cloth and usual solvents (eg benzine).
- Do not use water, nitro solvents or similar.!
NOTE!
The moving parts must be free of dirt and dust.
- If necessary, lubricate the moving parts as specified in the
lubrication chart.
WARNING!
Danger due to insufficient qualification of per-
sons!
Insufficiently qualified persons can not assess the risks
involved in handling the machine and expose themselves
and others to the risk of serious or fatal injuries.
- Commissioning and all other work should only be carried
out by qualified personnel.
- Keep inadequately qualified persons out of the work area.
WARNING!
Risk of death!
There is danger to life if these rules are not followed.
- Never carry out any work on the machine under the influ-
ence of alcohol, drugs or medication and / or in case of fati-
gue or concentration-impairing illnesses.
- The machine may only be operated by qualified personnel.
Wear ear protection
Wear safety gloves!
Wear safety shoes!
Wear protective clothing!
To Next Page
