Safety
PRM 10 E | Version 1.05 | EN 5
1.3 Limitation of liability
All Information and notes in these operating instructions were summarised
taking the applicable standards and rules, the state-of-the-art and our long-
term knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for damages:
- Non-observance of the operating instructions,
- Inappropriate use,
- Use of untrained staff,
- Unauthorised modifications,
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the explanations and presenta-
tions described here in case of special models, when using additional ordering
options or due to latest technical modifications.
The obligations agreed in the delivery contract, the general terms and conditi-
ons as well as the delivery conditions of the manufacturer and the legal regula-
tions valid at the time of the conclusion of the contract apply.
2 Safety
This section provides an overview of all important safety packages for perso-
nal protection and safe and trouble-free operation. Further task-related safety
instructions are contained in the individual chapters.
2.1 Symbol explanation
Safety instructions Safety insturctions in these operating instructions have been highlighted with
symbols. Safety instructions are indicated by signal terms that express the de-
gree of risk involved.
DANGER!
This combination of symbol and signal term indicates a
directly dangerous situation which may cause death or
serious injury if not averted.
WARNING!
This combination of symbol and signal words indicates an
immediately dangerous situation which may lead to death or
severe injuries if they are not avoided.
CAUTION!
This combination of symbol and signal word indicates a
potentially dangerous situation. It can cause minor or minor
injuries if not avoided.
To Next Page
