6 PRM 10 E | Version 1.05 | EN
Safety
Tips and recommendations
To reduce the risk of personal injury and property damage and to avoid dange-
rous situations, the safety instructions in this manual must be observed.
2.2 Intended use
The motorized ring bending machine is used exclusively for bending radii on
profiles, pipes and solid materials. It should be noted that certain profiles or
materials may require special wheels that are not included. Only profiles and
materials with the designated rollers may be processed. Proper use also inclu-
des compliance with all information in this manual. Any use beyond the inten-
ded use or otherwise is considered misuse.
Unauthorized modifications or modifications to the motorized ring bending ma-
chine can invalidate the CE conformity of the motorized ring bending machine
and are prohibited. The company Stürmer Maschinen GmbH assumes no lia-
bility for design and technical changes to the motorized ring bending machine.
The improper use of the motorized ring bending machine as well as the disre-
gard of the safety regulations or the operating instructions exclude a liability of
the manufacturer for resulting damage to persons or objects and cause the
warranty to expire!
ATTENTION!
This combination of symbol and signal word indicates a
potentially hazardous situation which, if not avoided, could
result in property damage and environmental damage.
NOTE!
This combination of symbol and signal word indicates a po-
tentially dangerous situation. It can lead to material and env-
ironmental damage if it is not avoided.
Tips and recommendations
This symbol indicates useful tips and recommendations as
well as information for efficient and trouble-free operation.
WARNING!
Risk of misuse!
Misuse of the machine can lead to dangerous situations.
- Only operate the machine in the power range specified in
the technical data.
- Never bypass or override the safety devices.
- Only operate the machine in a technically perfect condition.
To Next Page
