EC Declaration of Conformity
PRM 10 E | Version 1.05 | EN 33
According to machine directive 2006/42/EG Annex II 1.A
Manufacturer: Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Straße 26
D-96103 Hallstadt
herewith declares that the following product
Product group: Metallkraft
®
Metalworking machines
Type of machine: Ring Bending Machine
Designation of the machine: PRM 10 E
Item number: 3780011
Serial number:* ____________________
Year of manufacture*: 20____
* please fill in according to the information on the type plate
complies with all relevant provisions of the above-mentioned Directive as well as the other applicable Directives
(hereafter), including any changes in force at the time of declaration.
Relevant EU directives: 2014/30/EU EMC Directive
The following harmonized standards have been applied:
DIN EN ISO 12100:2011-03 Safety of machinery - General principles of design -
Risk assessment and risk reduction (ISO 12100: 2010)
DIN EN 60204-1:2007-06 Safety of machinery - Electrical equipment of machinery -
Part 1: General requirements
Responsible for documentation: Kilian Stürmer, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt
Hallstadt, 29.09.2020
______________________
Kilian Stürmer
CEO Director
13 EC Declaration of Conformity
To Next Page
