To Next Page

To Previous Page

MI 3000 EasiPLUS Safety and operational considerations

2.5 Standards applied

The EasiPLUS instrument is manufactured and tested in accordance with the following

regulations:

Electromagnetic compatibility (EMC)

BS EN 61326 Electrical equipment for measurement, control and laboratory

use – EMC requirements

Class B (Hand-held equipment used in controlled EM

environments)

Safety (LVD)

BS EN 61010-1 Safety requirements for electrical equipment for measurement,

control and laboratory use – Part 1: General requirements

BS EN 61010-

031

Safety requirements for hand-held probe assemblies for electrical

measurement and test

BS EN 61010-2-

032

Safety requirements for electrical equipment for measurement,

control, and laboratory use - Part 2-032: Particular requirements

for hand-held and hand-manipulated current sensors for electrical

test and measurement

Functionality

BS EN 61557 Electrical safety in low voltage distribution systems up to 1000

and 1500 V

– Equipment for testing, measuring or

monitoring of protective measures

Part 1 ......... General requirements

Part 2 ......... Insulation resistance

Part 3 ......... Loop resistance

Part 4 ......... Resistance of earth connection and equipotential

bonding

Part 6 ......... Residual current devices (RCDs) in TT and TN

systems

Part 7 ......... Phase sequence

Part 10........ Combined measuring equipment

DIN 5032 Photometry

Part 7 ......... Classification of illuminance meters and luminance

meters

Other reference standards for testing RCDs

BS EN 61008 Residual current operated circuit-breakers without integral

overcurrent protection for household and similar uses

BS EN 61009 Residual current operated circuit-breakers with integral

overcurrent protection for household and similar uses

EN 60364-4-41 Electrical installations of buildings

Part 4-41 .... Protection for safety – protection against electric

shock

BS 7671 IEE Wiring Regulations (17

edition)

Note about EN and IEC standards:

 Text of this manual contains references to European and British standards. All

standards of EN 6XXXX (e.g. EN 61010) series are equivalent to IEC standards

with the same number (e.g. IEC 61010) and differ only in amended parts required

by European harmonization procedure.

Brand	METREL
Model	EasiPLUS MI 3000
Category	Test Equipment
Language	English

METREL EasiPLUS MI 3000 User Manual

Table of Contents

Questions and Answers:

METREL EasiPLUS MI 3000 Specifications

Related product manuals