MI 3000 EasiPLUS Preface
5
1 Preface
Congratulations on your purchase of the EasiPLUS instrument and its accessories from
METREL. The instrument was designed on a basis of rich experience, acquired through
many years of dealing with electric installation test equipment.
The EasiPLUS instrument is professional, multifunctional, hand-held test instrument
intended to perform all the measurements required in order for a total inspection of
electrical installations in buildings. The following measurements and tests can be
performed:
Voltage and frequency,
Continuity tests,
Insulation resistance tests,
RCD testing,
Fault loop / RCD trip-lock impedance measurements,
Line impedance,
Phase sequence,
The large graphic matrix display with backlight offers easy to read results, indications,
measurement parameters and messages. The operation of the instrument is designed
to be as simple and clear as possible and no special training (except for the reading this
instruction manual) is required in order to begin using the instrument.
To become more familiar with how to perform measurements in general and in typical
applications, we recommend reading Metrel handbook Measurements on electric
installations in theory and practice.
The instrument is equipped with all accessories required in order to perform testing
comfortably. The soft carrying bag, included with the meter, protect the instrument and
keep all accessories together making it simple and easy to move between locations.
To Next Page
Loading...
Need help?
General
