2.1 Instrument description
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4
￭￭￭￭￭￭￭￭
916 Ti‑Touch
2.1.2 Connectors
The 916 Ti‑Touch is equipped with the following connectors:
￭ Power connection
For connecting to the power grid using the power supply unit provi-
ded.
￭ Two MSB connectors (Metrohm Serial Bus)
For connecting dosing devices, one additional stirrer or a Remote Box.
￭ USB connector
For connecting peripheral devices (printer, PC keyboard, etc.), a USB
flash drive or a USB hub.
￭ Sensor connectors
One connector each for:
– Potentiometric electrodes (pH, ISE, metal)
– Reference electrodes
– Polarizable electrodes
– Intelligent electrodes (iTrodes)
– Temperature sensors (Pt1000 or NTC)
￭ Stirrer connector (depending on the product version)
For connecting a propeller stirrer (only available for the version without
magnetic stirrer).
￭ Ethernet connector
For connecting the Ti‑Touch to a network.
2.1.3 Intended use
The 916 Ti‑Touch is designed for usage as a titrator in analytical laborato-
ries. Its main application field is volumetric titration.
This instrument is suitable for processing chemicals and flammable sam-
ples. Therefore, the use of the instrument requires the user to have basic
knowledge and experience in handling toxic and caustic substances.
Knowledge regarding the application of fire prevention measures prescri-
bed for laboratories is also mandatory.
To Next Page
Loading...
Need help?
General
