6.2 Fundamentals of operation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
34
￭￭￭￭￭￭￭￭
916 Ti‑Touch
Proceed as follows:
1
Press the power switch on the left-hand side of the back panel of the
916 Ti‑Touch.
The current data is saved and the system is shut down. This process
takes just a short time. At the same time, all other instruments con-
nected to the 916 Ti‑Touch via a USB cable are also being switched
off.
6.2 Fundamentals of operation
6.2.1 Touch-sensitive screen
The entire 916 Ti‑Touch user interface is touch-sensitive. Simply touch a
few of the buttons on the interface to learn how a touch-sensitive screen
reacts. You can always return to the main dialog by touching [ ].
In order to activate an element on the 916 Ti‑Touch user interface, just
touch the screen with your fingertip, finger nail, the eraser of a pencil or a
stylus (special tool for operating instruments with touch-sensitive screens).
CAUTION
Never touch the touch screen with a pointed or sharp object such as a
ballpoint pen.
In the default setting, the software is configured in such a way that an
acoustic signal will be generated every time an active control is touched.
This setting can be deactivated in the system settings.
To Next Page
Loading...
Need help?
General
