6.1 Switching the instrument on and off
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
32
￭￭￭￭￭￭￭￭
916 Ti‑Touch
6 Operation
6.1 Switching the instrument on and off
Switching on the instrument
CAUTION
Peripheral devices (e.g., printers) must be connected and switched on
before you switch on the 916 Ti‑Touch.
NOTICE
English is set as the default dialog language when the instrument is
switched on for the first time.
Information about changing the dialog language can be found in the
chapter Selecting the dialog language of the detailed manual.
Proceed as follows:
1
￭ Press the power switch on the left-hand side of the back panel of
the 916 Ti‑Touch.
The 916 Ti‑Touch is initialized. A system test is performed. This
process takes some time.
To Next Page
Loading...
Need help?
General
