46
2. The user selects Acquire, Sample from
the File menu bar.
It is not necessary to acquire a reference first
with the MultiVial Analyzer, since it is
programmed to take a reference as part of the
scan sequence.
To change the Product ID, right-click over the
“Product ID” column. This brings up the
product selection menu.
Highlight the desired product, and press
“Enter”. This sets the product for the
highlighted rows.
Also note that 20 vials are shown, in a 4 x 5
configuration. This came from the Select Tray
Dialog box. (It is shown at right, as a reminder.)
6.2.1 Sample ID Entry
There are several ways to enter the Sample ID:
Entry Method 1: Right-click on the circle that represents the vial position. The circle turns yellow (It
To Next Page
Loading...
Need help?
General
