Metso ND9200F User Manual

2 7 ND92F 70 en
READ THESE INSTRUCTIONS FIRST!
These instructions provide information about the safe handling and operation of the intelligent valve controller.
If you require additional assistance, please contact the manufacturer or manufacturer's representative.
Addresses and phone numbers are printed on the back cover.
SAVE THESE INSTRUCTIONS!
Subject to change without notice.
All trademarks are property of their respective owners.
Table of Contents
1 ND9000 PRODUCT FAMILY SUMMARY ....... 3
1.1 Key features........................................... 3
2 ND9200F INTELLIGENT VALVE CONTROLLER WITH
FOUNDATION FIELDBUS COMMUNICATION... 4
2.1 General .................................................. 4
2.2 Technical description ............................ 4
2.3 Markings ................................................ 4
2.4 Technical specifications ........................ 5
2.5 Recycling and disposal ......................... 6
2.6 Safety precautions ................................. 6
3 TRANSPORTATION, RECEPTION AND
STORAGE ....................................................... 6
4 MOUNTING...................................................... 7
4.1 General .................................................. 7
4.2 Mounting on EC and EJ actuators......... 7
4.3 Mounting on Metso actuators with
VDI/VDE mounting face ......................... 7
4.4 Mounting on linear actuator of
nelesCV Globe....................................... 8
4.5 Mounting on linear actuator with IEC 60534
mounting face ........................................ 8
4.6 Piping..................................................... 9
4.7 Electrical connections.......................... 12
5 LOCAL USER INTERFACE (LUI) ................. 13
5.1 Measurement monitoring ..................... 13
5.2 Guided start-up.................................... 13
5.3 Configuration menu ............................. 14
5.4 Mode menu.......................................... 14
5.5 Configuration parameters .................... 15
5.6 Valve travel calibration......................... 17
5.7 Special displays................................... 18
5.8 Write protection.................................... 19
6 MAINTENANCE............................................. 19
6.1 Prestage............................................... 19
6.2 Spool valve .......................................... 20
6.3 Flame arrestor assembly ..................... 20
6.4 Diaphragms ......................................... 20
6.5 Communication circuit board .............. 20
7 ERROR MESSAGES..................................... 21
7.1 Failsafe errors ...................................... 21
7.2 Alarms.................................................. 21
7.3 Errors ................................................... 22
7.4 Warnings.............................................. 22
7.5 Notifications ......................................... 23
8 TROUBLE SHOOTING.................................. 23
9 ND92_F/K_, ND92_F/I__, ND92_F/B__
(WITH LIMIT SWITCHES) ............................. 24
9.1 Introduction.......................................... 24
9.2 Installing ND92_F/K_, ND92_F/I_ or
ND92_F/B_ on a valve controller 25
9.3 Electrical connections.......................... 25
9.4 Adjustment........................................... 25
9.5 Removal of the limit switches ND92_F/K_,
ND92_F/I_ or ND92_F/B for accessing
the valve controller............................... 26
9.6 Circuit diagrams .................................. 26
9.7 Maintenance ........................................ 26
10 TOOLS........................................................... 26
11 ORDERING SPARE PARTS ......................... 26
12 DRAWINGS AND PARTS LISTS .................. 27
12.1 Exploded view and parts list, ND9200F27
12.2 Exploded view and parts list,
ND92_F/K_, ND92_F/I__, ND92_F/B__... 29
12.3 Mounting parts for EC05-14 actuators,
rising signal opens valve ..................... 31
12.4 Mounting parts for B1C/B1J 6-20 actuators31
12.5 Mounting parts for B1C/B1J 25-50,
B1C 502 and B1J322 actuators........... 32
12.6 Mounting parts for Quadra-Powr®
actuators .............................................. 32
12.7 Mounting parts for linear actuators of
nelesCV Globe..................................... 33
12.8 Mounting parts for linear actuators...... 34
12.9 Connection diagrams .......................... 35
13 DIMENSIONS ................................................ 39
14 EC DECLARATION OF CONFORMITY ........ 40
15 TYPE CODING .............................................. 41

Metso ND9200F Specifications

General

Brand	Metso
Model	ND9200F
Category	Controller
Language	English