Microhard Systems IPN4G - Page 125

© Microhard Systems Inc. 125
4.0 Configuration
Remote Port
Enter the Remote Port number.
Values (IP Address)
0
Filter expression
Filter expression selects which packets will be captured. If no expression is
given, all packets will be captured. Otherwise, only packets for which
expression is `true' will be captured. Example: tcp&&port 80
The “tcpdump” manual, available on the internet provides detailed expression syntax.
Values (chars)
(no default)
Remote IP
The Remote IP is the IP Address of the NetFlow collector where the flow
reports are be sent.
Values (IP Address)
0.0.0.0
Version
Select the Netflow version format to use. V1, 5 and 7 are supported.
Values (selection)
V1 / V5 / V7