© Microhard Systems Inc. 63
4.0 Configuration
Image 4-3-4: Carrier > Traffic Watchdog
4.3 Carrier
4.3.4 Carrier > Traffic Watchdog
The Wireless Traffic Watchdog will detect if there has been no wireless traffic, or communication
with the Cellular carrier for a configurable amount of time. Once that time has elapsed, the unit
will reset, and attempt to re-establish communication with the cellular carrier.
Enable or Disable the Traffic Watchdog.
Traffic Watchdog
Values (Selection)
Enable / Disable
The Check Interval tells the IPn4G how often (in seconds) to
check for wireless traffic to the cellular carrier. (1-60000
seconds)
Check Interval
Values (seconds)
1
The Reboot Timer will reset the unit if there has been no
Cellular RF activity in the configured time. (300 –60000
seconds)
Reboot Time Limit
Values (seconds)
600
To Next Page
Loading...
