Microhard Systems IPN4G - Command Syntax

© Microhard Systems Inc. 175
5.0 AT Command Line Interface
ATL <enter>
AT Commands available:
AT Commands available:
AT AT Echo OK
ATE0 Disable Echo
ATE1 Enable Echo
AT+TEST AT Echo TEST
ATH Show a list of previously run AT commands
ATL List all available AT commands
AT&R Reserved
AT&V Display modem active profile
AT&W Reserved
AT+MREB Reboot the modem
ATA Quit
ATO Quit
AT+CMGS Send SMS
AT+CMGR Read SMS with changing status
AT+CMGL List SMSs with changing status
AT+CMGD Delete SMSs
AT+GMR Modem Record Information
AT+GMI Get Manufacturer Identification
AT+CNUM Check Modem's Phone Number
AT+CIMI Check Modem's IMEI and IMSI
AT+CCID Check Modem's SIM Card Number
AT+MSYSI System summary information
AT+MMNAME Modem Name Setting
AT+MLEIP Set the IP address of the modem LAN Ethernet interface
AT+MDHCP Enable or disable DHCP server running on the Ethernet interface
AT+MDHCPA Set the range of IP addresses to be assigned by the DHCP server
AT+MEMAC Query the MAC address of local Ethernet interface
AT+MSIP Set LAN static IP
AT+MSCT Set LAN Connection Type
AT+MNTP Define NTP server
AT+MPIPP Enable or disable IP-Passthrough
AT+MCNTO Set console timeout
AT+MRTF Reset the modem to the factory default settings of from non-volatile (NV) memory
AT+MTWT Enable or disable traffic watchdog timer used to reset the modem
AT+MSCMD Enable or disable system sms command service
AT+MDISS Set discovery service used by the modem
AT+MPWD Set password
AT+MIKACE Enable or disable ICMP keep-alive check
AT+MIKAC Set ICMP keep-alive check
AT+MDDNSE Enable or disable DDNS
AT+MDDNS Set DDNS
AT+MEURD1 Define Event UDP Report No.1
AT+MEURD2 Define Event UDP Report No.2
AT+MEURD3 Define Event UDP Report No.3
AT+MNMSR Define NMS Report
AT+MGPSR1 Define GPS Report No.1
AT+MGPSR2 Define GPS Report No.2
AT+MGPSR3 Define GPS Report No.3
AT+MGPSR4 Define GPS Report No.4
(Continued……)
ATL
Command Syntax
Lists all available AT Commands.
ATL <enter>
Description
Example