Microhard Systems IPN4G - Page 166

© Microhard Systems Inc. 166
5.0 AT Command Line Interface
AT+MCTPS
Command Syntax
Enable/Disable the Com1 serial port.
AT+MCTPS=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MCTPS=0<enter>
Response:
OK
AT+MCTBR
Command Syntax
Set Comport baud rate.
AT+MCTBR=<Baud Rate>
Baud Rate:
0 300
1 600
2 1200
3 2400
4 3600
5 4800
6 7200
7 9600
8 14400
9 19200
10 28800
11 38400
12 57600
13 115200
Description
Example
Input:
AT+MCTBR=13<enter>
Response:
OK