© Microhard Systems Inc. 34
4.0 Configuration
Using the FTP Service Enable/Disable function, you can disable the
FTP service (Port 21) from running on the IPn4G. This port is reserved
for internal use / future use.
FTP Server
Values (selection)
Start / Restart / Stop
Microhard Sh
Custom SSH Port. Reserved for internal use.
Start / Restart / Stop
Values (selection)
Telnet Service
Using the Telnet Service Enable/Disable function, you can disable the
Telnet service (Port 23) from running on the IPn4G.
Start / Restart / Stop
Values (characters)
To Next Page
Loading...
