Auto Black Point Clipping
This lets you set the percentage of the pixels to be truncated in the
shadow region. Effective only when “Auto White/Black point” option
is selected in the AIC dialog box.
Minimum Output level
This lets you set the minimum output level of the Black Point. The
higher the percentage value, the lower the contrast.
Maximum Output level
This lets you set the maximum output level of the White Point. The
lower the percentage value, the lower the contrast.
Cursor Auxiliary Lines
This command allows you to create horizontal and vertical grid lines
with your cursor to help define a scan frame precisely. Using the
grid lines, you can also read the measurements of your ruler more
easily.
To use this feature:
1. Choose the Cursor Auxiliary Lines command in the
Preferences menu. From the submenu that appears, select how
the cursor lines will appear.
● On both x (horizontal) and y (vertical) axes
■ On x axis only
■ On y axis only
■ None (no cursor lines)
2. Click on the Scan Frame tool.
To Next Page
Loading...
