5
2.2 Key Feature
⚫
Signal source frequency range: DC, 10Hz ~ 3/5/10/20/30MHz
⚫ Signal source grade: 10mV ~ 2V / 100μA ~ 20mA
⚫ Basic accuracy up to ±0.08%
⚫ ALC function
⚫ Output resistance 25Ω/100Ω, switchable
⚫ Wide resistance measurement range from 25 mΩ to 40
MΩ (measurement accuracy up to 10%)
⚫ Parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, DCR, ESR, Vac, Iac, Vdc, Idc,
etc.
⚫ Ultra-high measuring speed
⚫ Enable circuit/short circuit/load calibration function
⚫ Electric meter mode, multistep list mode, scan & analyze mode
⚫ Up to four component parameters can be selected in the electric meter mode.
The induction and DCR values can be measured and displayed simultaneously
⚫ Auto component classification: Comparator function and Handler BIN classifica-
tion function
⚫ Up to 32 sets of multistep list programs can be stored in the permanent memory
and up to 16 test steps can be arranged in each program
⚫ Rapid automation and data access function is realizable for USB, LAN, GPIB
and RS232 interfaces
⚫ PC connection data analysis software is available optionally
⚫ 7" 800*480 TFT LCD color screen
⚫ Ultra-light design: 344x145x343mm, 3kg
⚫ Ultra-low power consumption (<30W) without fans and zero noise
To Next Page
