Microtest 6630 - Description of Function Keys on Back Panel

10
3.3 Description of function keys on back panel
*Rear view (millimeters)
PORT
FUNCTION
1. Handler
Pass/Fail signal (see3.4.3 Hander Interface)
2. RS232
For connecting to software port(see3.4.2 RS232 Con-
nector)
3. GPIB
Remote control port: 24-pin block(see3.4.1 GPIB
Connector)
4. EXT. I/O
For expanding Bias Input/Output port
5. Trigger
Pedal Switch port
6. USB
For software copying and upgrading
7. LAN
Network port
8. Power jack
Fuse block
AC power for 90~264V / 47~63Hz
The fuse block contains input power fuse T3A/250V
1 2 3
7
4
65
8