37
5.2.10
PRESET
It resets the LIST file as a new List file, all of the steps are deleted. <TRIG-
GER MODE: SINGLE>;<TRIGGER DELAY:0mS>;<OUTPUT IMPED-
ANCE:100>;<ALC: OFF>;<BEEP WHEN: OFF>;<RANGE HOLD:
ON>;<FAIL RETEST: OFF>;<STATISTICS: OFF>.
5.3 CORR. (LIST CORRECTION)
Under the LIST SET or LIST RUN page, list correction and meter correction are
not the synchronize function. It suggests doing List Correction when starting multi-
step testing at the first time or changing any List setup value.
To Next Page
Loading...
