Microtest 6630 - Bias; Range DC; Trig; Comp

19
4.6 BIAS
Use the <Up/Down> directional buttons to select <BIAS>. Use ↑↑, ↑, ↓ and ↓↓ to
set the Bias value
The range is between -12Vdc~+12Vdc.
4.7 RANGE DC
Select<Range>with<Direction>key. It is preset as<Auto>. The measuring range
belongs to internal parameter, which will be based to search the bay according
to the measuring items. The range recommendssetting as<Auto>in order to ob-
tain better measuring accuracy. The range actually measured will be displayed
at the lower-left corner of LCD panel. Further, there are also <1-30Ω all fre-
quency>, <2-300Ω frequency below 1.2 MHz>, <3-3KΩ frequency below 120
KHz> and<4-30KΩ frequency below 12 KHz> ranges for option. Faster meas-
uring speed can be achieved when setting at “Range Hold”.
4.8 TRIG
Use the <Up/Down> directional buttons to select. The options include <REPEAT> and
<SINGLE>.
4.9 COMP
Use the <Up/Down> directional buttons to select. The options include <Compare category>.