4-4
ARC-6000
98-05012
R3
Sometimes connectors become damaged or worn out
after many years of service. In this case, contact your
MID-TECH
supplier for a replacement connector kit.
MID-TECH strongly recommends replacement of
damaged cables as soon as possible. Once the cable
insulation is damaged, moisture and chemicals can
work their way under the insulation and cause
corrosion of the conductor resulting in continued
problems with the cable if it isn’t replaced.
NOTICE: A Returned Material Authorization
Number (RMA #) must be obtained from MID-TECH
or your dealer for all items returned to MID-TECH
for repair or replacement.
MID-TECH product(s) returned for repair or
replacement must be cleaned and free of all chemi-
cal contamination before arriving at the MID-TECH
facility.
Due to increasing OSHA requirements regarding
the handling of chemically contaminated items,
along with EPA restrictions regarding the disposal
of chemical contaminants, MID-TECH technicians
will not be allowed to handle, nor will we be able to
dispose of the contaminants on returned item(s).
The chemically contaminated items will be returned
to you without action taken by MID-TECH.
The items can then be returned to MID-TECH, using
the existing RMA #, after a thorough cleaning.
Mid-T
ech
Mid-T
ech
To Next Page
Loading...