English - 14
003-2915-99
© Midmark Corporation 2018
Action Description Display
Press Press start to initialize the User Settings
menus.
Adjust Units of
Measure
The “+” and “-” buttons alternate the
setting between English or Metric
When the desired Units of Measure
appear on the display...
Press
To store the desired Units of Measure
This brings up the Time Clock programing
display
Adjust Time Clock The “+“ and “-” buttons will adjust the
values of the following settings
Minute.
When the desired values appear on the
display...
Press
for all settings. When all settings are
completed pressing the “P” will initiate
normal power up.
NOTE: User Settings for Date and Clock must be updated manually for day light savings and leap year
User Settings
User setting mode will enable the user to set the desired unit of measure and adjust the time
clock. To enter the user settings mode, unplug and replug the power cord while pressing and
holding the button until the User Settings screen below appears.
To Next Page
Loading...