English - 38
003-2915-99
© Midmark Corporation 2018
Thermal Printer (Optional)
Operating the Printer
s automatically powered up
and initialized. No user intervention or setup is required.
Printer Tape Description
The printer will print the following information for each sterilizer cycle:
selected
with water.
heating phase is completed.
When
completed.
with 5:00. The printer continues to print the elapsed time in 5 minute increments until the drying phase
of the sterilization cycle with the duration of each phase of the cycle and the Total Cycle Time. Following the
[NOTE: If drying cycle is aborted, “DRYING COMPLETE” and “CYCLE COMPLETE” will not print].
To Next Page
Loading...