English - 9
003-2915-99
© Midmark Corporation 2018
Controls and Indicators - continued...
Control Function
P button Programming mode button that allows operator to
procedure. Used in conjunction with buttons 1 or 2.
+ (plus) button
be increased or changed when in location 1 or 2
and the P (programming) mode is activated.
- (minus) button
be decreased or changed when in location 1 or 2
and the P (programming) mode is activated.
Door Handle refer to illustration For latching / opening door.
refer to illustration
Shows amount of water in reservoir. Tube also
used for drainage of reservoir into suitable
container.
Fill Opening refer to illustration
refer to illustration
Thermal Printer (Optional) refer to illustration The printer (optional equipment) can be used to
and pressure during a cycle.
Fill Opening
Water Level Indicator and
Reservoir Drain Tube
Door Handle
Thermal Printer
(optional)
Pressure Relief
Valve Test Lever
To Next Page
Loading...