Operation
52
Starting a programme
Press the Start/Stop button.
The Start/Stop button's LED will light up and the button's LED will
go out.
A programme can no longer be changed after it has been started.
A programme can either be interrupted (see “Interrupting a
programme”) or cancelled (see “Cancelling a programme”).
Programme
sequence
indicator
After the start of a programme the wash phase description and, for 10
seconds Programme start, are shown in the display.
During the programme cycle the and arrow buttons can be used
to switch between the wash phase, the target temperature or the
actual temperature, or the A0 value in the second line of the display.
The time remaining is shown in the third line of the display.
Universal
Main wash
Duration
G
Min
23
To Next Page
Loading...
