Miele PG 8056 U - Water Hardness; Display View

Further settings
86
Water hardness
You can use this menu to set the water softener to the water
hardness of the mains supply.
For further information see “Filling the salt reservoir”.
Display view
During a programme the Actual or Required temperature can be
shown in the second line of the display.
 Select the Further settings menu.
Display view
Actual temperature
Required temperature
(
 Select Display view and press OK to open the relevant menu.
The following options are available:
- Actual temperature
Display the actual temperature during a programme (this value will
vary during the course of the programme).
- Required temperature
Display the required temperature for the main wash or the final rinse
(the maximum value is displayed as a static value. It will change
from one programme block to the next).
 Select the option you want and confirm your choice with the
OKbutton.