Operation
53
End of programme
After a programme has ended normally, the Start/Stopbutton's LED
will go out and the button's LED will flash. The message
Programme finished will appear in the bottom line of the display.
Universal
Temperature
Programme finished
55 °C
In addition to this, a buzzer will sound for approx. 3seconds (factory
default setting). To alter the buzzers, see “Settings, Volume”.
If the switch-off function is enabled, the commercial dishwasher
switches itself off after a short period of time.
Press the button to switch it on again.
Switching off
Press the button until the LED in the button goes out.
Unloading the dishwasher
Dishes tend to break and chip more easily when they are hot. Allow
the dishes to cool until they are comfortable enough to handle before
unloading them.
If you open the door fully after switching off, the dishes will cool much
faster.
First unload the lower basket, then the upper basket. This will prevent
water drops from the upper basket falling onto the dishes in the lower
basket.
To Next Page
Loading...
