Additional functions
56
Delay start
The start time of a programme can be delayed, e.g. to benefit from
economy rates of electricity. A delay start time of between 1minute
and 24 hours can be selected.
Delay start must be switched on in the Settings menu (see
“Settings , Delay start”).
If Delay start has been switched off, it will not be visible when
additional functions are called up.
When using the Delay start function, make sure that the cleaning
agent dispenser is dry before adding powder cleaning agent. Wipe
dry with a cloth if necessary.
If the dispenser is wet, cleaning agent can become lumpy, with the
result that it is not fully dispensed.
Setting the
start time
Switch the dishwasher on with the button.
Select the programme you require (see “Operation, Selecting a
programme”). The LED on the Start/Stop button will flash.
Press the OK button.
Use the arrow buttons (higher) and (lower) to set the hours and
minutes and confirm each entry using the OK button.
When you have entered the start time, press the Start/Stop button.
Universal
Temperature
55 °C
12:30Switch on at
The selected programme, along with the temperature and start time,
will then be displayed.
To cancel a set delay start before it has started, switch the
dishwasher off using the button.
To Next Page
Loading...
