Settings
60
Delay start
You can select whether Delay start appears in the Additional
functions menu or not.
Selecting No will remove Delay start from the Additional functions
menu for operators.
To be able to delay the start of a programme, Yes must be selected in
order for it to be displayed in Additional functions.
To set the start time see “Additional functions, Delay start”.
Select the Settings menu.
Select Delay start and confirm your choice with the OK button.
The following options are available:
- No
Delay start is switched off and therefore not visible as an additional
function.
- Yes
Delay start is switched on.
Select the option you want and confirm your choice with the OK
button.
Drying
This menu option is deactivated at the factory. The door will not open
at the end of the programme.
This prevents items and baskets from falling out of the commercial
dishwasher when the door is open.
To Next Page
Loading...
