Miele PG 8056 U - Page 99

Problem solving guide
99
Problem Cause and remedy
Check drainage Drain fault. There might be water in the wash cabinet.
 Clean the filter combination (see “Cleaning and care”).
 Clean the drain pump (see “Maintenance”).
 Clean the non-return valve (see “Maintenance”).
 Remove any kink or loop in the drain hose.
Fault XXX
(XXX stands for a number)
There may be a technical fault.
After 10 seconds:
 Switch the dishwasher back on.
 Select the programme you want.
 Press the Start/Stopbutton.
If the fault message appears again, there is a technical
fault.
 Call the Miele Service Department.