Technical Information
27
PW 6xx7
Item number in table Item description Options Details
14 Fill type Auto load
adjustment
Fixes which type of
monitoring is used by the
control to register the water
level when filling the
machine. The setting options
available later in the wash
program depend on the type
of fill programmed here.
When Auto load
adjustment is set, the
laundry load affects the
machine response, e.g.,
water levels, dispensed
quantities and the number of
rinses. If, after creating a
program, the programmer
changes the type of fill in the
associated program header
from Auto load adjustment
to Water quantity in L or
Laundry:Suds ratio in
kg/L, the control resets the
level settings in the blocks to
0 mm accordingly. If a
change is made from Auto
load adjustment to Water
height in mm, no
modifications are made in
the blocks.
Water quantity in L
Fixes which type of
monitoring is used by the
control to register the water
level when filling the
machine. The setting options
available later in the wash
program depend on the type
of fill programmed here.
Laundry:Suds ratio
in kg/L
Fixes which type of
monitoring is used by the
control to register the water
level when filling the
machine. The setting options
available later in the wash
program depend on the type
of fill programmed here.
15 Release Yes / No
In the Release machine
state, only approved
programs can be selected. If
the programmer selects No
here, then in the future, if the
machine state is set to
Release, the operator
cannot select this program.
In such a case, only
programs with the setting
Release - Yes in the
program header can be
selected. Default factory
setting: Yes. This is
equivalent to key switch
setting A with Profitronic I.
To Next Page
Loading...
Need help?
General
