Milesight Network camera - Assign an IP Address Manually

User Manual
20
Step 6: Change the IP address successfully.
Figure 3-6
Step 7: By double clicking the selected camera, you can access the camera via web browser directly.
The Internet Explorer window will pop up.
Figure 3-7
3.1.2 Assign An IP Address Manually
If the network segments of the computer and that of the camera are different, please follow the
steps to change the IP address:
Step 1: Change the IP address of computer to 192.168.5.0 segment.
a. Start-> Control Panel->Network and Internet Connection->Network Connection->Local Area
Connection, and double click it. (See Figure3-8)