Milesight Network camera - 4.3 Advanced Settings

User Manual
38
Alarm Phone List
Figure 4-13
Phone Type Phone Number (Call by phone number) & Direct IP Call (Check to
accept peer to peer IP call).
Phone Number/IP Address Call by phone number or IP address.
Remark Name Display name.
Duration The time schedule to use SIP.
White List
Figure 4-14
Phone Type Phone Number (Call by phone number) & Direct IP Call
(Check to accept peer to peer IP call).
Phone Number/IP Address Including the phone number or IP address on the white
list.
Enable White List Number Filter When enabled, only the designated phone number or IP
address can visit
4.3.2UPNP
Universal Plug and Play (UPNP) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices.
The UPnP protocol allows devices to connect seamlessly and to simplify the implementation of
networks in the home and corporate environments.
With the function enabled, you don’t need to configure the port mapping for each port, and the
camera is connected to the Wide Area Network via the router.