Page 16 of 113
Electrical
Specifications
Power supply voltage 100 to 240 Volt AC, 50/60 Hz
Input to pump 24 Volt DC
Power
LFH version: maximum 120 W
ISL version: maximum 140 W
FLEX version: maximum 150 W
Operating
Requirements
Ambient temperature 15 to 40 °C (59 to 104 °F)
Relative humidity < 90%
Altitude < 2000 meters (6561 feet)
Filtration units
Compatible with all Steritest
®
,
Sterisolutest, Steridilutor and liquid
transfer kits
Protection type (IEC 60529-2004) IP64 for the pump
Sound intensity <70 dB
Regulatory
Information
Millipore SAS certifies that the Steritest
®
Symbio Pump is designed and
manufactured in application of:
• The following European Council directives:
- Electromagnetic compatibility 2014/30/EU
- Low voltage directive 2014/35/EU
- Restriction of the use of certain Hazardous Substances in electrical
equipment (RoHS) 2011/65/EU
• The following standards:
- IEC 61010-1(Ed. 3) Safety requirements for electrical equipment
for measurement, control and laboratory use – Part 1: General
requirements
- IEC 61326-1 (Ed. 2) Electrical equipment for measurement, control
and laboratory use -EMC requirements – Part 1: General requirements.
These standards include the national deviations as appropriate for the
relevant countries: USA, Canada, Australia, Argentina, Brazil, China, India,
Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Singapore
• The Federal Communications Commission (FCC) standard and test method:
- Standard:
FCC part 15: 2014 Code of federal regulations
Title 47 – Telecommunication chapter 1- Federal Communication
Commission.
Part 15 - Radio frequency devices Subpart B - Unintentional Radiators
Limits and Methods of measurement of radio disturbance.
- Test method:
Section 15 .107 - Information to the user
Section 15 .109 - Conducted limits
• The European Union Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE)
To Next Page
Loading...