Millipore Sigma Steritest - Using the Main Screen

Page 43 of 113
When the Autotest is complete, the following screen displays showing the status
of the optional accessories and data sources. A
symbol in a check box indicates
that an accessory or data source is connected to the communication hub.
3. Press the
button to continue. The main screen displays.
Using the Main Screen
Use the Main screen to:
• Use the pump in the Standard Mode (see Using the Pump in Standard
Mode)
• Use the pump in the Test Method Mode (see Using the Pump in Test Method
Mode)
• Configure the pump (see Configuring the Steritest
®
Symbio Pump)