Page 17 of 113
Overview of the Pump Assembly
The Steritest
®
Symbio Pump assembly consists of the following components:
• The pump, including:
• A control panel on the front
• An adjustable color display at the back
• A pump head located below a protective cover on the top
• Carrying handles (standard on LFH version; optional on FLEX version)
• A bottle holder (mounted on the left side of the pump)
• A drain tray (mounted on the right side of the pump)
• A communication hub equipped with the cable dedicated to connect it to the
pump
• A power cord
Documentation and some accessories are also delivered with the pump:
• A network cable (for connection of the pump to a network or directly to a
computer) for the transfer of test methods from a computer to the pump
• A USB flash drive for the transfer of test methods from a computer to the pump
• Silicone drain tubing for the liquid disposal
• 2 threaded stems (ISL and FLEX versions only)
• A flat seal (FLEX version only)
• Quick guides (in German, English, Spanish, French, Italian, Portuguese,
Japanese, Simplified Chinese , Turkish, and Russian):
• Steritest
®
Symbio Pump Startup Quick Guide
• Steritest
®
Symbio Pump User Interface Quick Guide
• Steritest
®
Symbio Software Quick Guide
• Safety instructions (in German, English, Spanish, French, Italian, Portuguese,
Japanese, Simplified Chinese, Turkish, and Russian)
• Steritest
®
Symbio 2 media pumps EAC request
• 2 Steritest
®
canisters carrying trays with user quick guide
WARNING
Do not discard the Steritest
®
canisters carrying trays. Deliver them to the
final user of the pump.
To Next Page