Page 31 of 113
Steritest
®
Pumps Syringe Support
Use the Steritest
®
Pumps syringe support together with the Steritest
®
device for
prefilled syringes to test most prefilled syringes (with or without needle) produced
by the pharmaceutical industry.
The syringe support holds the syringe. The distribution of sterile fluid to dilute the
content of the syringe is controlled by an electrovalve, eliminating the necessity
to turn the dilution bottle between each syringe testing.
The syringe support valve is connected to the pump through a dedicated port on
the communication hub.
This accessory is autoclavable (except for the removable automatic valve)
and is fully resistant to vaporized hydrogen peroxide (VHP) and peracetic acid
decontamination cycles in isolators.
For more information, see the Steritest
®
Pumps Syringe Support User Guide
(see Accessories and Replacement Parts).
To Next Page
Loading...